Kafka and SQLite Integration

[[inputs.kafka_consumer]]
              ## Kafka brokers.
              brokers = ["localhost:9092"]

              ## Set the minimal supported Kafka version. Should be a string contains
              ## 4 digits in case if it is 0 version and 3 digits for versions starting
              ## from 1.0.0 separated by dot. This setting enables the use of new
              ## Kafka features and APIs.  Must be 0.10.2.0(used as default) or greater.
              ## Please, check the list of supported versions at
              ## https://pkg.go.dev/github.com/Shopify/sarama#SupportedVersions
              ##   ex: kafka_version = "2.6.0"
              ##   ex: kafka_version = "0.10.2.0"
              # kafka_version = "0.10.2.0"

              ## Topics to consume.
              topics = ["telegraf"]

              ## Topic regular expressions to consume.  Matches will be added to topics.
              ## Example: topic_regexps = [ "*test", "metric[0-9A-z]*" ]
              # topic_regexps = [ ]

              ## When set this tag will be added to all metrics with the topic as the value.
              # topic_tag = ""

              ## The list of Kafka message headers that should be pass as metric tags
              ## works only for Kafka version 0.11+, on lower versions the message headers
              ## are not available
              # msg_headers_as_tags = []

              ## The name of kafka message header which value should override the metric name.
              ## In case when the same header specified in current option and in msg_headers_as_tags
              ## option, it will be excluded from the msg_headers_as_tags list.
              # msg_header_as_metric_name = ""

              ## Set metric(s) timestamp using the given source.
              ## Available options are:
              ##   metric -- do not modify the metric timestamp
              ##   inner  -- use the inner message timestamp (Kafka v0.10+)
              ##   outer  -- use the outer (compressed) block timestamp (Kafka v0.10+)
              # timestamp_source = "metric"

              ## Optional Client id
              # client_id = "Telegraf"

              ## Optional TLS Config
              # enable_tls = false
              # tls_ca = "/etc/telegraf/ca.pem"
              # tls_cert = "/etc/telegraf/cert.pem"
              # tls_key = "/etc/telegraf/key.pem"
              ## Use TLS but skip chain & host verification
              # insecure_skip_verify = false

              ## Period between keep alive probes.
              ## Defaults to the OS configuration if not specified or zero.
              # keep_alive_period = "15s"

              ## SASL authentication credentials.  These settings should typically be used
              ## with TLS encryption enabled
              # sasl_username = "kafka"
              # sasl_password = "secret"

              ## Optional SASL:
              ## one of: OAUTHBEARER, PLAIN, SCRAM-SHA-256, SCRAM-SHA-512, GSSAPI
              ## (defaults to PLAIN)
              # sasl_mechanism = ""

              ## used if sasl_mechanism is GSSAPI
              # sasl_gssapi_service_name = ""
              # ## One of: KRB5_USER_AUTH and KRB5_KEYTAB_AUTH
              # sasl_gssapi_auth_type = "KRB5_USER_AUTH"
              # sasl_gssapi_kerberos_config_path = "/"
              # sasl_gssapi_realm = "realm"
              # sasl_gssapi_key_tab_path = ""
              # sasl_gssapi_disable_pafxfast = false

              ## used if sasl_mechanism is OAUTHBEARER
              # sasl_access_token = ""

              ## SASL protocol version.  When connecting to Azure EventHub set to 0.
              # sasl_version = 1

              # Disable Kafka metadata full fetch
              # metadata_full = false

              ## Name of the consumer group.
              # consumer_group = "telegraf_metrics_consumers"

              ## Compression codec represents the various compression codecs recognized by
              ## Kafka in messages.
              ##  0 : None
              ##  1 : Gzip
              ##  2 : Snappy
              ##  3 : LZ4
              ##  4 : ZSTD
              # compression_codec = 0
              ## Initial offset position; one of "oldest" or "newest".
              # offset = "oldest"

              ## Consumer group partition assignment strategy; one of "range", "roundrobin" or "sticky".
              # balance_strategy = "range"

              ## Maximum number of retries for metadata operations including
              ## connecting. Sets Sarama library's Metadata.Retry.Max config value. If 0 or
              ## unset, use the Sarama default of 3,
              # metadata_retry_max = 0

              ## Type of retry backoff. Valid options: "constant", "exponential"
              # metadata_retry_type = "constant"

              ## Amount of time to wait before retrying. When metadata_retry_type is
              ## "constant", each retry is delayed this amount. When "exponential", the
              ## first retry is delayed this amount, and subsequent delays are doubled. If 0
              ## or unset, use the Sarama default of 250 ms
              # metadata_retry_backoff = 0

              ## Maximum amount of time to wait before retrying when metadata_retry_type is
              ## "exponential". Ignored for other retry types. If 0, there is no backoff
              ## limit.
              # metadata_retry_max_duration = 0

              ## When set to true, this turns each bootstrap broker address into a set of
              ## IPs, then does a reverse lookup on each one to get its canonical hostname.
              ## This list of hostnames then replaces the original address list.
              ## resolve_canonical_bootstrap_servers_only = false

              ## Strategy for making connection to kafka brokers. Valid options: "startup",
              ## "defer". If set to "defer" the plugin is allowed to start before making a
              ## connection. This is useful if the broker may be down when telegraf is
              ## started, but if there are any typos in the broker setting, they will cause
              ## connection failures without warning at startup
              # connection_strategy = "startup"

              ## Maximum length of a message to consume, in bytes (default 0/unlimited);
              ## larger messages are dropped
              max_message_len = 1000000

              ## Max undelivered messages
              ## This plugin uses tracking metrics, which ensure messages are read to
              ## outputs before acknowledging them to the original broker to ensure data
              ## is not lost. This option sets the maximum messages to read from the
              ## broker that have not been written by an output.
              ##
              ## This value needs to be picked with awareness of the agent's
              ## metric_batch_size value as well. Setting max undelivered messages too high
              ## can result in a constant stream of data batches to the output. While
              ## setting it too low may never flush the broker's messages.
              # max_undelivered_messages = 1000

              ## Maximum amount of time the consumer should take to process messages. If
              ## the debug log prints messages from sarama about 'abandoning subscription
              ## to [topic] because consuming was taking too long', increase this value to
              ## longer than the time taken by the output plugin(s).
              ##
              ## Note that the effective timeout could be between 'max_processing_time' and
              ## '2 * max_processing_time'.
              # max_processing_time = "100ms"

              ## The default number of message bytes to fetch from the broker in each
              ## request (default 1MB). This should be larger than the majority of
              ## your messages, or else the consumer will spend a lot of time
              ## negotiating sizes and not actually consuming. Similar to the JVM's
              ## `fetch.message.max.bytes`.
              # consumer_fetch_default = "1MB"

              ## Data format to consume.
              ## Each data format has its own unique set of configuration options, read
              ## more about them here:
              ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
              data_format = "influx"

[[outputs.sql]]
  ## Database driver
  ## Valid options: mssql (Microsoft SQL Server), mysql (MySQL), pgx (Postgres),
  ## sqlite (SQLite3), snowflake (snowflake.com), clickhouse (ClickHouse)
  driver = "sqlite"

  ## Data source name
  ## For SQLite, the DSN is a filename or URL with the scheme "file:".
  ## Example: "file:/path/to/telegraf.db?cache=shared"
  data_source_name = "file:/path/to/telegraf.db?cache=shared"

  ## Timestamp column name
  timestamp_column = "timestamp"

  ## Table creation template
  ## Available template variables:
  ##  {TABLE}        - table name as a quoted identifier
  ##  {TABLELITERAL} - table name as a quoted string literal
  ##  {COLUMNS}      - column definitions (list of quoted identifiers and types)
  table_template = "CREATE TABLE {TABLE} ({COLUMNS})"

  ## Table existence check template
  ## Available template variables:
  ##  {TABLE} - table name as a quoted identifier
  table_exists_template = "SELECT 1 FROM {TABLE} LIMIT 1"

  ## Initialization SQL (optional)
  init_sql = ""

  ## Maximum amount of time a connection may be idle. "0s" means connections are never closed due to idle time.
  connection_max_idle_time = "0s"

  ## Maximum amount of time a connection may be reused. "0s" means connections are never closed due to age.
  connection_max_lifetime = "0s"

  ## Maximum number of connections in the idle connection pool. 0 means unlimited.
  connection_max_idle = 2

  ## Maximum number of open connections to the database. 0 means unlimited.
  connection_max_open = 0

  ## Metric type to SQL type conversion
  ## The values on the left are the data types Telegraf has and the values on the right are the SQL types used when writing to SQLite.
  #[outputs.sql.convert]
  #  integer       = "INT"
  #  real          = "DOUBLE"
  #  text          = "TEXT"
  #  timestamp     = "TIMESTAMP"
  #  defaultvalue  = "TEXT"
  #  unsigned      = "UNSIGNED"
  #  bool          = "BOOL"