Syslog and Dynatrace Integration

Input and output integration overview

The Syslog plugin enables the collection of syslog messages from various sources using standard networking protocols. This functionality is critical for environments where systems need to be monitored and logged efficiently.

The Dynatrace plugin allows users to send metrics collected by Telegraf directly to Dynatrace for monitoring and analysis. This integration enhances the observability of systems and applications, providing valuable insights into performance and operational health.

Integration details

Syslog

The Syslog plugin for Telegraf captures syslog messages transmitted over various protocols such as TCP, UDP, and TLS. It supports both RFC 5424 (the newer syslog protocol) and the older RFC 3164 (BSD syslog protocol). This plugin operates as a service input, effectively starting a service that listens for incoming syslog messages. Unlike traditional plugins, service inputs may not function with standard interval settings or CLI options like --once. It includes options for setting network configurations, socket permissions, message handling, and connection handling. Furthermore, the integration with Rsyslog allows forwarding of logging messages, making it a powerful tool for collecting and relaying system logs in real-time, thus seamlessly integrating into monitoring and logging systems.

Dynatrace

The Dynatrace plugin for Telegraf facilitates the transmission of metrics to the Dynatrace platform via the Dynatrace Metrics API V2. This plugin can function in two modes: it can run alongside the Dynatrace OneAgent, which automates authentication, or it can operate in a standalone configuration that requires manual specification of the URL and API token for environments without a OneAgent. The plugin primarily reports metrics as gauges unless explicitly configured to treat certain metrics as delta counters using the available config options. This feature empowers users to customize the behavior of metrics sent to Dynatrace, harnessing the robust capabilities of the platform for comprehensive performance monitoring and observability. It’s crucial for users to ensure compliance with version requirements for both Dynatrace and Telegraf, thereby optimizing compatibility and performance when integrating with the Dynatrace ecosystem.

Configuration

Syslog

[[inputs.syslog]]
  ## Protocol, address and port to host the syslog receiver.
  ## If no host is specified, then localhost is used.
  ## If no port is specified, 6514 is used (RFC5425#section-4.1).
  ##   ex: server = "tcp://localhost:6514"
  ##       server = "udp://:6514"
  ##       server = "unix:///var/run/telegraf-syslog.sock"
  ## When using tcp, consider using 'tcp4' or 'tcp6' to force the usage of IPv4
  ## or IPV6 respectively. There are cases, where when not specified, a system
  ## may force an IPv4 mapped IPv6 address.
  server = "tcp://127.0.0.1:6514"

  ## Permission for unix sockets (only available on unix sockets)
  ## This setting may not be respected by some platforms. To safely restrict
  ## permissions it is recommended to place the socket into a previously
  ## created directory with the desired permissions.
  ##   ex: socket_mode = "777"
  # socket_mode = ""

  ## Maximum number of concurrent connections (only available on stream sockets like TCP)
  ## Zero means unlimited.
  # max_connections = 0

  ## Read timeout (only available on stream sockets like TCP)
  ## Zero means unlimited.
  # read_timeout = "0s"

  ## Optional TLS configuration (only available on stream sockets like TCP)
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key  = "/etc/telegraf/key.pem"
  ## Enables client authentication if set.
  # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]

  ## Maximum socket buffer size (in bytes when no unit specified)
  ## For stream sockets, once the buffer fills up, the sender will start
  ## backing up. For datagram sockets, once the buffer fills up, metrics will
  ## start dropping. Defaults to the OS default.
  # read_buffer_size = "64KiB"

  ## Period between keep alive probes (only applies to TCP sockets)
  ## Zero disables keep alive probes. Defaults to the OS configuration.
  # keep_alive_period = "5m"

  ## Content encoding for message payloads
  ## Can be set to "gzip" for compressed payloads or "identity" for no encoding.
  # content_encoding = "identity"

  ## Maximum size of decoded packet (in bytes when no unit specified)
  # max_decompression_size = "500MB"

  ## Framing technique used for messages transport
  ## Available settings are:
  ##   octet-counting  -- see RFC5425#section-4.3.1 and RFC6587#section-3.4.1
  ##   non-transparent -- see RFC6587#section-3.4.2
  # framing = "octet-counting"

  ## The trailer to be expected in case of non-transparent framing (default = "LF").
  ## Must be one of "LF", or "NUL".
  # trailer = "LF"

  ## Whether to parse in best effort mode or not (default = false).
  ## By default best effort parsing is off.
  # best_effort = false

  ## The RFC standard to use for message parsing
  ## By default RFC5424 is used. RFC3164 only supports UDP transport (no streaming support)
  ## Must be one of "RFC5424", or "RFC3164".
  # syslog_standard = "RFC5424"

  ## Character to prepend to SD-PARAMs (default = "_").
  ## A syslog message can contain multiple parameters and multiple identifiers within structured data section.
  ## Eg., [id1 name1="val1" name2="val2"][id2 name1="val1" nameA="valA"]
  ## For each combination a field is created.
  ## Its name is created concatenating identifier, sdparam_separator, and parameter name.
  # sdparam_separator = "_"

Dynatrace

[[outputs.dynatrace]]
  ## For usage with the Dynatrace OneAgent you can omit any configuration,
  ## the only requirement is that the OneAgent is running on the same host.
  ## Only setup environment url and token if you want to monitor a Host without the OneAgent present.
  ##
  ## Your Dynatrace environment URL.
  ## For Dynatrace OneAgent you can leave this empty or set it to "http://127.0.0.1:14499/metrics/ingest" (default)
  ## For Dynatrace SaaS environments the URL scheme is "https://{your-environment-id}.live.dynatrace.com/api/v2/metrics/ingest"
  ## For Dynatrace Managed environments the URL scheme is "https://{your-domain}/e/{your-environment-id}/api/v2/metrics/ingest"
  url = ""

  ## Your Dynatrace API token.
  ## Create an API token within your Dynatrace environment, by navigating to Settings > Integration > Dynatrace API
  ## The API token needs data ingest scope permission. When using OneAgent, no API token is required.
  api_token = ""

  ## Optional prefix for metric names (e.g.: "telegraf")
  prefix = "telegraf"

  ## Optional TLS Config
  # tls_ca = "/etc/telegraf/ca.pem"
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"
  ## Optional flag for ignoring tls certificate check
  # insecure_skip_verify = false

  ## Connection timeout, defaults to "5s" if not set.
  timeout = "5s"

  ## If you want metrics to be treated and reported as delta counters, add the metric names here
  additional_counters = [ ]

  ## In addition or as an alternative to additional_counters, if you want metrics to be treated and
  ## reported as delta counters using regular expression pattern matching
  additional_counters_patterns = [ ]

  ## NOTE: Due to the way TOML is parsed, tables must be at the END of the
  ## plugin definition, otherwise additional config options are read as part of the
  ## table

  ## Optional dimensions to be added to every metric
  # [outputs.dynatrace.default_dimensions]
  # default_key = "default value"

Input and output integration examples

Syslog

1. Centralized Log Management: Use the Syslog plugin to aggregate log messages from multiple servers into a central logging system. This setup can help in monitoring overall system health, troubleshooting issues effectively, and maintaining audit trails by collecting syslog data from different sources.

2. Real-Time Alerting: Integrate the Syslog plugin with alerting tools to trigger real-time notifications when specific log patterns or errors are detected. For example, if a critical system error appears in the logs, an alert can be sent to the operations team, minimizing downtime and performing proactive maintenance.

3. Security Monitoring: Leverage the Syslog plugin for security monitoring by capturing logs from firewalls, intrusion detection systems, and other security devices. This logging capability enhances security visibility and helps in investigating potentially malicious activities by analyzing the captured syslog data.

4. Application Performance Tracking: Utilize the Syslog plugin to monitor application performance by collecting logs from various applications. This integration helps in analyzing the application’s behavior and performance trends, thus aiding in optimizing application processes and ensuring smoother operation.

Dynatrace

1. Cloud Infrastructure Monitoring: Utilize the Dynatrace plugin to monitor a cloud infrastructure setup, feeding real-time metrics from Telegraf into Dynatrace. This integration provides a holistic view of resource utilization, application performance, and system health, enabling proactive responses to performance issues across various cloud environments.

2. Custom Application Performance Metrics: Implement custom application-specific metrics by configuring the Dynatrace output plugin to send tailored metrics from Telegraf. By leveraging additional counters and dimension options, development teams can gain insights that are precisely aligned with their application’s operational requirements, allowing for targeted optimization efforts.

3. Multi-Environment Metrics Management: For organizations running multiple Dynatrace environments (e.g., production, staging, and development), use this plugin to manage metrics for all environments from a single Telegraf instance. With proper configuration of endpoints and API tokens, teams can maintain consistent monitoring practices throughout the SDLC, ensuring that performance anomalies are detected early in the development process.

4. Automated Alerting Based on Metrics Changes: Integrate the Dynatrace output plugin with an alerting mechanism that triggers notifications when specific metrics exceed defined thresholds. This scenario involves configuring additional counters to monitor crucial application performance indicators, enabling swift remediation actions to maintain service availability and user satisfaction.

Feedback

Thank you for being part of our community! If you have any general feedback or found any bugs on these pages, we welcome and encourage your input. Please submit your feedback in the InfluxDB community Slack.