SNMP Trap and Graphite Integration

Input and output integration overview

The SNMP Trap Telegraf plugin enables the receipt of SNMP notifications, facilitating comprehensive network monitoring by capturing important events from network devices.

The Graphite plugin enables users to send metrics collected by Telegraf into Graphite via TCP. This integration allows for efficient storage and visualization of time-series data using Graphite’s powerful capabilities.

Integration details

SNMP Trap

The SNMP Trap plugin serves as a receiving endpoint for SNMP notifications, known as traps and inform requests. Operating over UDP, it listens for incoming notifications, which can be configured to arrive on a specific port. This plugin is integral to network monitoring and management, allowing systems to collect and respond to SNMP traps sent from various devices across the network, including routers, switches, and servers. The plugin supports secure transmission options through SNMPv3, enabling authentication and encryption parameters to protect sensitive data. Additionally, it gives users the flexibility to configure multiple aspects of SNMP like MIB file locations, making it adaptable for various environments and use cases. Transitioning from the deprecated netsnmp backend to the more current gosmi backend is recommended to leverage its enhanced features and support. Users implementing this plugin can effectively monitor network events, automate responses to traps, and maintain a robust network monitoring infrastructure.

Graphite

This plugin writes metrics to Graphite via raw TCP, allowing for seamless integration of Telegraf collected metrics into the Graphite ecosystem. With this plugin, users can configure multiple TCP endpoints for load balancing, ensuring high availability and reliability in metric transmission. The ability to customize metric naming with prefixes and utilize various templating options enhances flexibility in how data is represented within Graphite. Additionally, support for Graphite tags and options for strict sanitization of metric names allow for robust data management, catering to the varying needs of users. This capability is essential for organizations looking to leverage Graphite’s powerful metrics storage and visualization while maintaining control over data representation.

Configuration

SNMP Trap

[[inputs.snmp_trap]]
  ## Transport, local address, and port to listen on.  Transport must
  ## be "udp://".  Omit local address to listen on all interfaces.
  ##   example: "udp://127.0.0.1:1234"
  ##
  ## Special permissions may be required to listen on a port less than
  ## 1024.  See README.md for details
  ##
  # service_address = "udp://:162"
  ##
  ## Path to mib files
  ## Used by the gosmi translator.
  ## To add paths when translating with netsnmp, use the MIBDIRS environment variable
  # path = ["/usr/share/snmp/mibs"]
  ##
  ## Deprecated in 1.20.0; no longer running snmptranslate
  ## Timeout running snmptranslate command
  # timeout = "5s"
  ## Snmp version; one of "1", "2c" or "3".
  # version = "2c"
  ## SNMPv3 authentication and encryption options.
  ##
  ## Security Name.
  # sec_name = "myuser"
  ## Authentication protocol; one of "MD5", "SHA", "SHA224", "SHA256", "SHA384", "SHA512" or "".
  # auth_protocol = "MD5"
  ## Authentication password.
  # auth_password = "pass"
  ## Security Level; one of "noAuthNoPriv", "authNoPriv", or "authPriv".
  # sec_level = "authNoPriv"
  ## Privacy protocol used for encrypted messages; one of "DES", "AES", "AES192", "AES192C", "AES256", "AES256C" or "".
  # priv_protocol = ""
  ## Privacy password used for encrypted messages.
  # priv_password = ""

Graphite

# Configuration for Graphite server to send metrics to
[[outputs.graphite]]
  ## TCP endpoint for your graphite instance.
  ## If multiple endpoints are configured, the output will be load balanced.
  ## Only one of the endpoints will be written to with each iteration.
  servers = ["localhost:2003"]

  ## Local address to bind when connecting to the server
  ## If empty or not set, the local address is automatically chosen.
  # local_address = ""

  ## Prefix metrics name
  prefix = ""

  ## Graphite output template
  ## see https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
  template = "host.tags.measurement.field"

  ## Strict sanitization regex
  ## This is the default sanitization regex that is used on data passed to the
  ## graphite serializer. Users can add additional characters here if required.
  ## Be aware that the characters, '/' '@' '*' are always replaced with '_',
  ## '..' is replaced with '.', and '\' is removed even if added to the
  ## following regex.
  # graphite_strict_sanitize_regex = '[^a-zA-Z0-9-:._=\p{L}]'

  ## Enable Graphite tags support
  # graphite_tag_support = false

  ## Applied sanitization mode when graphite tag support is enabled.
  ## * strict - uses the regex specified above
  ## * compatible - allows for greater number of characters
  # graphite_tag_sanitize_mode = "strict"

  ## Character for separating metric name and field for Graphite tags
  # graphite_separator = "."

  ## Graphite templates patterns
  ## 1. Template for cpu
  ## 2. Template for disk*
  ## 3. Default template
  # templates = [
  #  "cpu tags.measurement.host.field",
  #  "disk* measurement.field",
  #  "host.measurement.tags.field"
  #]

  ## timeout in seconds for the write connection to graphite
  # timeout = "2s"

  ## Optional TLS Config
  # tls_ca = "/etc/telegraf/ca.pem"
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"
  ## Use TLS but skip chain & host verification
  # insecure_skip_verify = false

Input and output integration examples

SNMP Trap

1. Centralized Network Monitoring: Integrate the SNMP Trap plugin into a centralized monitoring solution to receive alerts about network devices in real-time. By configuring the plugin to listen for traps from various routers and switches, network administrators can swiftly react to issues, such as device outages or critical thresholds being surpassed. This setup enables proactive management and quick resolutions to network problems, ensuring minimal downtime.

2. Automated Incident Response: Use the SNMP Trap plugin to trigger automated incident response workflows whenever specific traps are received. For instance, if a trap indicating a hardware failure is detected, an automated script could be initiated to gather diagnostics, notify support personnel, or even attempt a remediation action. This approach enhances the efficiency of IT operations by reducing manual interference and speeding up response times.

3. Network Performance Analytics: Deploy the SNMP Trap plugin to collect performance metrics along with traps for a comprehensive view of network health. By aggregating this data into analytics platforms, network teams can analyze trends, identify bottlenecks, and optimize performance based on historical data. This allows for informed decision-making and strategic planning around network upgrades or changes.

4. Integrating with Alerting Systems: Connect the SNMP Trap plugin to third-party alerting systems like PagerDuty or Slack. Upon receiving predefined traps, the plugin can send alerts to these systems, enabling teams to be instantly notified of important network events. This integration ensures that the right people are informed at the right time, helping maintain high service levels and quick issue resolution.

Graphite

1. Dynamic Metric Visualization: The Graphite plugin can be utilized to feed real-time metrics from various sources, such as application performance data or server health metrics, into Graphite. This dynamic integration allows teams to create interactive dashboards that visualize key performance indicators, track trends over time, and make data-driven decisions to enhance system performance.

2. Load Balanced Metrics Collection: By configuring multiple TCP endpoints within the plugin, organizations can implement load balancing for metric transmission. This use case ensures that metric delivery is both resilient and efficient, reducing the risk of data loss during high-traffic periods and maintaining a reliable flow of information to Graphite.

3. Customized Metrics Tagging: With support for Graphite tags, users can employ the Graphite plugin to enhance the granularity of their metrics. Tagging metrics with relevant information, such as application environment or service type, allows for more refined queries and analytics, enabling teams to drill down into specific areas of interest for better operational insights.

4. Enhanced Data Sanitization: Leveraging the plugin’s strict sanitization options, users can ensure that their metric names comply with Graphite’s requirements. This proactive measure eliminates potential issues arising from invalid characters in metric names, allowing for cleaner data management and more accurate visualizations.

Feedback

Thank you for being part of our community! If you have any general feedback or found any bugs on these pages, we welcome and encourage your input. Please submit your feedback in the InfluxDB community Slack.