Ceph and Graphite Integration

Input and output integration overview

The Ceph plugin for Telegraf helps in gathering performance metrics from both MON and OSD nodes in a Ceph storage cluster for effective monitoring and management.

The Graphite plugin enables users to send metrics collected by Telegraf into Graphite via TCP. This integration allows for efficient storage and visualization of time-series data using Graphite’s powerful capabilities.

Integration details

Ceph

The Ceph Storage Telegraf plugin is designed to collect performance metrics from Monitor (MON) and Object Storage Daemon (OSD) nodes within a Ceph storage cluster. Ceph, a highly scalable storage system, integrates its metrics collection through this plugin, facilitating easy monitoring of its components. With the introduction of this plugin in the 13.x Mimic release, users can effectively gather detailed insights into the performance and health of their Ceph infrastructure. It functions by scanning configured socket directories for specific Ceph service socket files, executing commands via the Ceph administrative interface, and parsing the returned JSON data for metrics. The metrics are organized based on top-level keys, allowing for efficient monitoring and analysis of cluster performance. This plugin provides valuable capabilities for managing and maintaining the performance of a Ceph cluster by allowing administrators to understand system behavior and identify potential issues proactively.

Graphite

This plugin writes metrics to Graphite via raw TCP, allowing for seamless integration of Telegraf collected metrics into the Graphite ecosystem. With this plugin, users can configure multiple TCP endpoints for load balancing, ensuring high availability and reliability in metric transmission. The ability to customize metric naming with prefixes and utilize various templating options enhances flexibility in how data is represented within Graphite. Additionally, support for Graphite tags and options for strict sanitization of metric names allow for robust data management, catering to the varying needs of users. This capability is essential for organizations looking to leverage Graphite’s powerful metrics storage and visualization while maintaining control over data representation.

Configuration

Ceph

[[inputs.ceph]]
  ## This is the recommended interval to poll. Too frequent and you
  ## will lose data points due to timeouts during rebalancing and recovery
  interval = '1m'

  ## All configuration values are optional, defaults are shown below

  ## location of ceph binary
  ceph_binary = "/usr/bin/ceph"

  ## directory in which to look for socket files
  socket_dir = "/var/run/ceph"

  ## prefix of MON and OSD socket files, used to determine socket type
  mon_prefix = "ceph-mon"
  osd_prefix = "ceph-osd"
  mds_prefix = "ceph-mds"
  rgw_prefix = "ceph-client"

  ## suffix used to identify socket files
  socket_suffix = "asok"

  ## Ceph user to authenticate as, ceph will search for the corresponding
  ## keyring e.g. client.admin.keyring in /etc/ceph, or the explicit path
  ## defined in the client section of ceph.conf for example:
  ##
  ##     [client.telegraf]
  ##         keyring = /etc/ceph/client.telegraf.keyring
  ##
  ## Consult the ceph documentation for more detail on keyring generation.
  ceph_user = "client.admin"

  ## Ceph configuration to use to locate the cluster
  ceph_config = "/etc/ceph/ceph.conf"

  ## Whether to gather statistics via the admin socket
  gather_admin_socket_stats = true

  ## Whether to gather statistics via ceph commands, requires ceph_user
  ## and ceph_config to be specified
  gather_cluster_stats = false

Graphite

# Configuration for Graphite server to send metrics to
[[outputs.graphite]]
  ## TCP endpoint for your graphite instance.
  ## If multiple endpoints are configured, the output will be load balanced.
  ## Only one of the endpoints will be written to with each iteration.
  servers = ["localhost:2003"]

  ## Local address to bind when connecting to the server
  ## If empty or not set, the local address is automatically chosen.
  # local_address = ""

  ## Prefix metrics name
  prefix = ""

  ## Graphite output template
  ## see https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
  template = "host.tags.measurement.field"

  ## Strict sanitization regex
  ## This is the default sanitization regex that is used on data passed to the
  ## graphite serializer. Users can add additional characters here if required.
  ## Be aware that the characters, '/' '@' '*' are always replaced with '_',
  ## '..' is replaced with '.', and '\' is removed even if added to the
  ## following regex.
  # graphite_strict_sanitize_regex = '[^a-zA-Z0-9-:._=\p{L}]'

  ## Enable Graphite tags support
  # graphite_tag_support = false

  ## Applied sanitization mode when graphite tag support is enabled.
  ## * strict - uses the regex specified above
  ## * compatible - allows for greater number of characters
  # graphite_tag_sanitize_mode = "strict"

  ## Character for separating metric name and field for Graphite tags
  # graphite_separator = "."

  ## Graphite templates patterns
  ## 1. Template for cpu
  ## 2. Template for disk*
  ## 3. Default template
  # templates = [
  #  "cpu tags.measurement.host.field",
  #  "disk* measurement.field",
  #  "host.measurement.tags.field"
  #]

  ## timeout in seconds for the write connection to graphite
  # timeout = "2s"

  ## Optional TLS Config
  # tls_ca = "/etc/telegraf/ca.pem"
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"
  ## Use TLS but skip chain & host verification
  # insecure_skip_verify = false

Input and output integration examples

Ceph

1. Dynamic Monitoring Dashboard: Utilize the Ceph plugin to create a real-time monitoring dashboard that visually represents the performance metrics of your Ceph cluster. By integrating these metrics into a centralized dashboard, system administrators can gain immediate insights into the health of the storage infrastructure, which aids in quickly identifying and addressing potential issues before they escalate.

2. Automated Alerting System: Implement the Ceph plugin in conjunction with an alerting solution to automatically notify administrators of performance degradation or operational issues within the Ceph cluster. By defining thresholds for key metrics, organizations can ensure prompt response actions, thereby improving overall system reliability and performance.

3. Performance Benchmarking: Use the metrics collected by this plugin to conduct performance benchmarking tests across different configurations or hardware setups of your Ceph storage cluster. This process can assist organizations in identifying optimal configurations that enhance performance and resource utilization, promoting a more efficient storage environment.

4. Capacity Planning and Forecasting: Integrate the metrics gathered from the Ceph storage plugin into broader data analytics and reporting tools to facilitate capacity planning. By analyzing historical metrics, organizations can forecast future utilization trends, enabling informed decisions about scaling storage resources effectively.

Graphite

1. Dynamic Metric Visualization: The Graphite plugin can be utilized to feed real-time metrics from various sources, such as application performance data or server health metrics, into Graphite. This dynamic integration allows teams to create interactive dashboards that visualize key performance indicators, track trends over time, and make data-driven decisions to enhance system performance.

2. Load Balanced Metrics Collection: By configuring multiple TCP endpoints within the plugin, organizations can implement load balancing for metric transmission. This use case ensures that metric delivery is both resilient and efficient, reducing the risk of data loss during high-traffic periods and maintaining a reliable flow of information to Graphite.

3. Customized Metrics Tagging: With support for Graphite tags, users can employ the Graphite plugin to enhance the granularity of their metrics. Tagging metrics with relevant information, such as application environment or service type, allows for more refined queries and analytics, enabling teams to drill down into specific areas of interest for better operational insights.

4. Enhanced Data Sanitization: Leveraging the plugin’s strict sanitization options, users can ensure that their metric names comply with Graphite’s requirements. This proactive measure eliminates potential issues arising from invalid characters in metric names, allowing for cleaner data management and more accurate visualizations.

Feedback

Thank you for being part of our community! If you have any general feedback or found any bugs on these pages, we welcome and encourage your input. Please submit your feedback in the InfluxDB community Slack.